Blog - PolyD Online 3D Printing

Date: 15/03/2021 Posted by: Davide

The 5 Mistakes Not to Make in 3D Printing STL Files

Hello Engineers!

You may have done some 3D printing and found that the result was poorly defined, had small defects or even failed to finish the print. This can be due to the STL file because of small imperfections, or the way it was exported. In this video we discuss the 5 most common...

Date: 05/03/2021 Posted by: Caterina

The 3D Printing File Check

Hello 3D Printing Engineers and Sympathisers!

Our online Estimator not only provides you with instant quotes, but also allows you to choose the types of print file control to suit your needs.

The 3D Print File Check

Before we delve into the explanation of the pos...

Date: 24/02/2021 Posted by: Davide

MJF, FDM or SLS. PolyD's advice for your 3D Printing

Hello Engineers!

Today we are talking about

There are various methods for printing online a 3D object, each with its own merits and limitations. The most commonly used printing techniques on the market today are FDM (Fused Deposition Modelling), SLS (Selective Laser Sintering)...

Date: 19/02/2021 Posted by: Caterina

Why choose Nylon PA12 in 3D printing?

Hello Engineers,

Today we are talking about PA12, one of the most widely used materials in 3D printing for obtaining higher quality parts while optimising costs.

WHY CHOOSE NYLON PA12 IN 3D PRINTING?

Nylon PA12 is commonly used in 3D printing...

Date: 11/02/2021 Posted by: Davide

Varnishing and Colouring for 3D Printing: what you need to know

Hi Engineers!

Do you know the difference between Varnishing, Standard Colouring and UV Resistant Colouring?

Painting consists of spraying an enamel onto the workpiece by qualified personnel in a spray booth. Standard or UV-resistant colouring is done by immersing the workpiece...